Oil Sump Cleaner

Industrial Vacuum suction unit for Oil and Chips recovery:

Cleantek design and manufacturing portable type oil sump cleaner and chips recovery system for engineering industries used in CNC machining shops.This oil sump cleaner removes the dust,coolant,sludge, dirt and chips from the oil sump, filters the dust,sludge and chips from the coolant and returns the filtered pure coolant to the oilsump. 

High vacuum motor produce vacuum inside the big tank, so that all metal debris,dust, cutting oil is sucked threw the nozzle.CNC cutting fluids contain a host of chemical additives such as biocides, emulsifiers, corrosion inhibitors, anti-foaming agents and more. It can cause skin irritation, rashes and dermatitis.

Then it is filtered via multistage filtration before entering into the tank. Afterthat pure coolant collected inside the tank and it is pumped out to the CNC sump.

The oil sump cleaner removes the dust,coolant,sludge, dirt and chips from the oil sump, filters the dust,sludge and chips from the coolant and returns the filtered pure coolant to the oilsump. 

Coolant filter separate the debris, greases and other unwanted contaminate from the coolant. Coolant pumping motor returns the pure coolant to the sump. Sump cleaner keeps the machines clean and free of bacteria and fungus.Therefore Oil Sump Cleaner need to clean this oil, sludge etc..

Features:

• Direct Drive Turbine Motor for Maintenance Free and continous running operation
• 100-1000 Litres collection Tank
• Easy to move & Portable version
• Easy to Operate
• High suction power

Advantages: 

• Save Stand by Time of Machine Tools
• Easy to suck the oil and chips and metal parts from machining centres
• Both SUction and dleivery by simaltaneously 
• Need single operator to use the machine. 
• Save Labour cost
• Increase the life of the coolant / cutting oil
• Extended oil change period
• Improve employee morale
• Reduced downtime of machine
• Improve healthier environment in shop floors
• Cut your cost of dirty coolant disposal by 50% to 90%
• Better control of coolant concentration ratio
• Improve machine tool cleanliness
• Reduce misting Eliminate environmental risks
• Improve cutting tool life and product quality
• Minimize coolant pump maintenance activities
• Safety for worker health