Fume Extractor

CLEANTEK welding fume purifier is manufactured for heavy duty industrial use to capture the pollution at source. Unit attached with a portable wheels frame to move wherever fume extraction is required. Fume extractor consist of 4 stage filtration with modern electrostatic filtration system. This electrostatic filtration requires periodic cleaning only. The Extractor Features four stage filtration and purification. System controlled by a control panel operated at 415 V / 50 Hz. 


How can fumes affect your health? 


Exposure to different types of welding fumes produces different health effects. If over the years you breathe in gases, fumes, and vapors in large quantities, your health will suffer.  


  • Irritation of the eyes, nose, and chest  
  • Coughing  
  • Shortness of breath  
  • Bronchitis  
  • Fluid in the lungs (edema)  
  • Inflammation of the lungs (pneumonitis) 
  • Loss of appetite  
  • Cramps  
  • Nausea / vomiting 

Some short-term health effects are:  


  • Chronic lung problems (bronchitis, pneumonia, asthma, emphysema, silicosis,  
  • Lung cancer  
  • Cancer of the larynx  
  • Cancer of the urinary tract 

Other health problems that may be related to welding fumes are:  


  • Skin diseases  
  • Hearing loss  
  • Gastritis, ulcers of the stomach  
  • Kidney damage  
  • Heart disease 

Welding fume Extractor - How it works:- 


Contaminated air is drawn by the suction motor threw the washable stainless steel mesh filter which trap the large dust particles. Then the air pass through fine filter fabric, here fine dust particles are filtered. Remaining air stream pass into the strong electric field (12.5 Kv to 13 Kv) (Ionizing section) where particulate receives an electrical charge. The charged particles then pass into a collector plate section made up of a series of equally spaced parallel plates. Each alternate plate is charged with the same polarity (6 Kv -7Kv) (Collecting section) as the particles, which repel, while attract and collect the contaminants. The contaminants are held in these plates until they are washed away. Further air pass into the gas phase activated carbon filter. Here the toxic gases are absorbed by the activated carbon. Then pure air sent out threw Exhaust line. 


MACHINE FEATURES


  • CLEANTEK Mobile welding Fume Extractor with Electrostatic Precipitator is specially designed for welding fume filtration applications.
  • Easy to move one place to another place. Suction arm is designed for rotating 360 degree around the machine.
  • Suitable for continous working without any trouble. CE approved induction motor for energy efficiency.
  • High rate of suction airflow and purifying efficiency is more than 99.9 % and pure air is discharge to workshop atmosphere.
  • Electronic panel board for Filter cleaning stage warning.
  • Spark arrester, Multi stage filters and Electrostatic filter is easy to clean.
  • Our Mobile Fume Extractor helps to maintain pollution free atmosphere in work place.

 


Business Type Manufacturer, Exporter, Supplier
Type Fume Extraction Systems
Application Extracting Fume
Color Blue
Automatic Grade Automatic
Country of Origin India
Brand Name Cleantek

Preferred Buyer From

Location India ( Tamil Nadu, Karnataka, Andaman & Nicobar Islands, Kerala, Andhra Pradesh, Telangana, Maharashtra only) & All other countries

Yes! I am interested


Price : 1.25 Lac - 2.50 Lac / piece
Get Best Price

MOQ : 1 Set

Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Type Fume Exhausters
Material Metal
Application Industrial
Feature Easy Maintenance, Good Qulality
Power Source Electric
Automation Grade Automatic
Brand Name Cleantek

Click to view more

Preferred Buyer From

Location India ( Tamil Nadu, Karnataka, Andaman & Nicobar Islands, Kerala, Andhra Pradesh, Telangana, Maharashtra only) & All other countries

Fume Extractor Filter:

Cleantek manufacturing fume Extarcor filter in various size and caapcity. The following filters made as per client requirements.

  • Pre Filter
  • Carbon Filter
  • Spark arrester
  • HEPA Filter
Read More...


Yes! I am interested


MOQ : 1 Piece(s)

Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Application Hazardous Fume / Dust
Condition Good
Place of Origin Coimbatore
Product Type Welding Fume Extractor
Brand Name Cleantek
Payment Terms T/T, Other
Delivery Time 1 Week (Min.)

Preferred Buyer From

Location India ( Tamil Nadu, Karnataka, Andaman & Nicobar Islands, Kerala, Andhra Pradesh, Telangana, Maharashtra only) & All other countries

Cleantek Welding Fume Extractor with suction arm to collect dust particles and fumes. CLEANTEK Welding Fume Extractor are manufactured as per the accepted quality standards. Extraction done by using suction arm assures good health and safety of human resources by removing welding smoke. Additionally, Welding Fume Extractor keeps product and production machines contaminant free. We give the time delivery of Welding Fume Extractor at given time frame.

How can welding fumes affect your health?
Exposure to different types of welding fumes produce different health effects. If over the years you breathe in gases, fumes, and vapors in large quantities, your health will suffer.

  • Shortness of breath
  • Bronchitis
  • Fluid in the lungs (edema)
  • Inflammation of the lungs (pneumonitis)
  • Loss of appetite
  • Coughing ,Irritation of the eyes, nose, and chest
  • Cramps
  • Nausea / vomiting, fluid in the lungs (edema)


Some short-term health effects are :

  • Chronic lung problems (bronchitis, pneumonia, asthma, emphysema, silicosis,
  • Lung cancer
  • Cancer of the larynx
  • Cancer of the urinary tract


Other health problems that may be related to welding fumes are :

  • Skin diseases
  • Hearing loss
  • Gastritis, ulcers of the stomach
  • Kidney damage
  • Heart disease


Cleantek design manufacturing Welding Fume Extractor machines in various capacity. Our machine purify the hazardous welding fume up-to 99 % and circulate the pure air. We are supplying 3D articulated swing arm 3.5 meter length for easy capture for fumes.

Models

  • Portable Fume Extractor
  • Stationary Fume Extractor
  • Wall Mounted Fume Extractor


How it works :
IN welding fume extractor Contaminated air is drawn by the suction motor threw the washable stainless steel mesh filter which trap the large dust particles. Then the air pass through fine filter fabric, here fine dust particles are filtered. Remaining air stream pass into the strong electric field (12.5 Kv to 13 Kv) (Ionizing section) where particulate receives an electrical charge. The charged particles then pass into a collector plate section made up of a series of equally spaced parallel plates. Each alternate plate is charged with the same polarity (6 Kv -7Kv) (Collecting section) as the particles, which repel, while attract and collect the contaminants. The contaminants are held in these plates until they are washed away. Further air pass into the gas phase activated carbon filter. Here the toxic gases are absorbed by the activated carbon. Then pure air sent out threw Exhaust line to atmosphere.

Our Machine Features :

  • CLEANTEK Mobile Welding Fume Extractor with Electrostatic Precipitatior is specially designed for welding fume filtration applications.
  • Movable arm can be stopped in any position of the three -dimensional space; the workers can work more efficiently.
  • Easy to move one place to another place.
  • Suitable for continous working without any trouble. CE approved induction motor for energy efficiency.
  • High rate of suction airflow and purifying efficiency is more than 99 % and pure air is discharge to workshop atmosphere.
  • Electronic panel board for “Filter cleaning stage” warning.
  • Spark arrester, Multi stage filters and Electrostatic filter is easy to clean.
  • Our Mobile Welding Fume Extractor helps to maintain pollution free atmosphere workshop.
  • Our Mobile Welding Fume Extractor helps to maintain pollution free atmosphere in workshop
  • Mobile / Stationary models available
  • Improves productivity and reduce maintenance


Sailent Features :

  • Cleantek Mobile Welding Fume Extractor with Electrostatic Precipitator Is specially designed for welding fume filtration applications
  • Easily movable inside the factory  / flexible suction arm can be stopped in any position of the three - dimensional space; the workers can work more efficiently
  • 99.9 & % HEPA 3 stage filtration options
  • Easy to move one place to another place
  • Easy replacement and cleaning of filters
  • Suitable for continuous working without any trouble. CE approved induction motor for energy efficiency
  • High rate of suction airflow and purifying efficiency is more than 99.9 % and pure air is discharge to workshop atmosphere
  • Electronic panel board for “Filter cleaning stage” warning
  • Spark arrester, Multi stage filters and Electrostatic filter is easy to clean


Applications :

  • Welding fume Filtration,Welding fume Killer system
  • Robotic Welding Fume Extraction
  • Soldering Pot Fume Filtration
  • Laser Fume Filtration
  • Hazardous Fume / Dust Filtration
  • Medical Lab Gas / Fume / dust Filtration
  • Pharma lab dust filtration
Read More...


Yes! I am interested


MOQ : 1 Piece(s)

Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Application Laser Treatment Centres Etc.
Condition Good
Product Type Soldering Fume Extractor
Feature Chemical treatments,More filtration area due to multistage filtration unit,Removes odors
Place Of Origin Coimbatore
Brand Name Cleantek
Payment Terms T/T, Other
Delivery Time 1 Week (Min.)

Click to view more

Preferred Buyer From

Location India ( Tamil Nadu, Karnataka, Andaman & Nicobar Islands, Kerala, Andhra Pradesh, Telangana, Maharashtra only) & All other countries

Cleantek manufacturing Exporting and Supplying of Soldering Fume Extractor, Soldering Fume Extraction System to filter the hazardous fume from PCB soldering station. We are presenting a range of Soldering Fume Extractor to avoid diseases like asthma, dizziness, headaches, membrane irritation etc. To maintain healthy workforce in the company, we use Soldering Fume Extractor that is necessary. We provide the best quality Soldering Fume Extractor to the clients as per their specifications. We give timely delivery of Soldering Fume Extractor within pre determined time frame at market leading rates.
 
Models

  • Tabletop soldering fume extractor
  • Centralized soldering fume extractor


Used For

  • Solder fumes
  • Waxing fumes
  • Solvent vapors
  • Refold oven exhaust
  • Dedrossing
  • Conformal coating vapors
  • Laser cutting & marking
  • Tinning & potting
  • Rework
  • Gluing
  • Printing
  • Chemical treatment


Sailent Features :

  • Chemical treatments
  • Multi Stage filtration systems including GAS module
  • More filtration area due to multistage filtration unit
  • Removes odors and organic vapors
  • Easy to replace the filters after filter life time


Applications :

  • Welding Fume Extraction
  • Laser / Printing Fume Extraction
  • Vehichle fume Extraction
  • Chemical Fume Extraction
  • Soldering Fume Extraction
  • Laser Treatment Centres
  • Medical Labs
  • Dental Clinics
  • Electronic Industries
  • Pharmaceuticals, etc.
Read More...


Yes! I am interested


Price : 5,500.00 / Piece
Get Best Price

MOQ : 1 Piece(s)

Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Product Type Table Top Fume Extractor
Application Extracting smoke in soldering / Brazing applications,Electronic PCB soldering
Feature Durable,Compact in Size,High end performance,Extracts finest dust particles,Cost effective
Condition Good
Place Of Origin Coimbatore
Brand Name Cleantek
Payment Terms T/T, Other
Delivery Time 1 Week (Min.)

Click to view more

Preferred Buyer From

Location India ( Tamil Nadu, Karnataka, Andaman & Nicobar Islands, Kerala, Andhra Pradesh, Telangana, Maharashtra only) & All other countries

All kind of brazing and soldering processes such as hand soldering or robotic soldering process produce hazardous fumes with fine dust. These fumes and dust are a health and safety risk and should workers be exposed to them they can cause serious longterm medical treatments. CLEANTEK fume extraction systems are provided for you and your workers, to enable capture of pollutants at the source. Our fume extractor benefits such as, cleaner more efficient production, increased product quality and improved working environments.

 

Details :

  • Cleantek manufactures Tabletop Fume Extractor for soldering fume extraction purpose. Soldering fumes are vary dangerous to workers, so it is necessary to put fume extraction system for each working station.
  • Cleantek offers high quality Tabletop Fume Extractor at extremely reasonable prices. Tabletop Fume Extractor is widely used in industries to serve extraction applications.
  • We are providing Tabletop Fume Extractor to the customers across the globe as per their requirements. We give timely delivery of Tabletop Fume Extractor within stipulated time frame. Our Tabletop Fume Extractor Systems are widely used for PCB soldering and other small applications.


Sailent Features :

  • Durable
  • Compact in Size
  • High end performance
  • Extracts finest dust particles
  • Cost effective


Applications :

  • Extracting smoke in soldering / Brazing applications
  • Electronic PCB soldering
Read More...


Yes! I am interested



Looking for Product Name ?

Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us